LARGE BAR WITH HIGH POWER ZONING AND PAGING


Click to expand

  • Example Description

    This system is a 3 zone system with 2 high power zones and 1 BGM (Back Ground Music) level zone. The Restaurant and Beer Garden, while 2 areas are treated as 1 zone.

    In this example an MYMDABCD provides BGM (Back Ground Music) program source and the ZM3M zone paging mic provides zone paging.

    The MYMDABCD has discrete outputs for CD/Media, DAB+/FM Radio and Bluetooth. These can each be connected to a separate input on the ZONEMIX3 zone routing mixer.

    The ZONEMIX3 allows source music from the MYMDABCD and paging to be routed to any or all of the 3 zones.

    A feed from a mixing desk in the auditorium can be connected to the fourth channel line level input of the ZONEMIX3.

    From the front of the ZONEMIX3 each of the 4, line level source inputs can be routed to each of the 3 zones. This can also be controlled from within each zone using the ZM3R source and volume control as shown.

    While the ZONEMIX3 is a stereo zone mixer in this example, each of the 3 outputs are set to mono.

    The AMB series power amplifiers are used to power two pairs of XDS12s which are driven in parallel mode.

    If more power is required to the Auditorium or Bar zones a second AMB power amplifier can be installed, using the XLR loop through connections from the first AMB amplifier.

    The loop through connectors on the XDS10's in the bar zone allow four speakers to be easily connected in parallel to the AMB amplifier.

    The Restaurant and Beer Garden zones are treated as 1 zone with each area being fed by 1 channel of an HS2250P 2 x 250 watt power amplifier. The ZM3R in the Restaurant controls the volume level and source in both areas.


  •  x1 
    ZONEMIX3 - Discontinued
    Zone Mixer
    3 stereo zone outputs
     x1 
    MYMDABCD - Discontinued
    DAB+FM Tuner and CD Player
    USB, SD Card and Bluetooth
     x2 
    AMB1600
    2 x 800W Power Amplifier
    Rugged Low Impedance Amplifier
     x1 
    HS2250P
    2 x 250W Power Amplifier
    USB/RS232 Control w mini DSP
     x1 
    ZM3M
    Remote Microphone Paging Station
     x2 
    ZM3R
    Remote Source and Volume Control
     x2 
    XDS12
    12 inch Passive Speaker
    300W, Black
     x4 
    XDS10
    10 inch Passive Speaker
    250W, Black
     x6 
    QF60CS
    Ceiling Speaker
    60W sealed back can
     x4 
    FLEX30B
    30W Wall Mount Speaker. IP65 Rated
    Black, Sold in Pairs
     x3 
    ATC7000
    Microphone Lead - XLR-3F to XLR-3M (3ft - 0.9m)
     x3 
    ATC7070
    Signal Lead - Dual RCA Jacks to Dual RCA Jacks (10ft - 3m)
     x1 
    AM75250W
    Speaker Cable, Figure 8
    250m roll, 2 x 0.75mm², Meter marked, White
     x1 
    INT12
    12RU Integrator Rack
    Wall Mounted
  • Large Bar with High Power Zoning and Paging - Application Example

Back to the top